Deep hole boring machine series t2120g t2120g / 1
The machine is a special machine for processing cylindrical deep hole parts. It is suitable for drilling and boring cylindrical deep hole parts. pressure head is used for oil supply during boring, and the cutting is discharged to the chip vessel at the head of the machine through the cutting area. During drilling, the internal chip removal method (BTA method) is adopted, i.e. oil is supplied by the pressure head. Through the cutting area, the cutting is discharged from the inside of the drill pipe to the chip removal pipe at the back of the bed.
The machine tool adopts PLC numerical control, the reciprocating motion of the pressure head and the feed carriage is controlled by servo motor, and the transmission adopts the rack transmission in the middle of the two guide rails, which ensures the accuracy and rigidity of the feed transmission in the ultra long motion. Protective covers are installed on both sides of the bed, and the structure of the oil tank on the ground is adopted to improve the environment of the machine tool. The machine tool can be equipped with two sets of automatic or manual high-efficiency tools, which greatly improves the machining efficiency of the machine tool.
The machine tool is a kind of machine tool with convenient operation, high efficiency and environmental protection.
Main technical specifications and performance
|
item
|
TECHNICAL DATE
|
T2120G、T2120G/1
|
|
Drilling diameter range
|
The range of driling diameter
|
φ40～80mm
|
|
Boring diameter range
|
The range of boring diameter
|
φ60～200mm
|
|
Maximum boring depth
|
The range of boring depth
|
1000-15000mm
|
|
Spindle center height
|
Height from spindle center to bed
|
400mm
|
|
Clamping diameter range of center frame
|
Workpiece clamped dia.range
|
φ60-φ300mm
|
|
Chuck diameter
|
The diameter ofchucks
|
φ400
|
|
Spindle speed range and series
|
Range and kinds of spindle speed
|
60-1200r/min Third gear stepless
|
|
Main motor power
|
The power of main motor
|
N=37KW Variable frequency motor
|
|
Feed speed range (stepless)
|
Range of feeding speed
|
5-2000mm/min
|
|
Feed motor power
|
Feed motor power
|
N=4.5KWAC servo
|
|
pressure head motor
|
Guide carriage motor
|
N=4.5KWAC servo
|
|
Cooling pump motor power
|
Cool pump motor power
|
N=5.5KW n=1440r/min
|
|
Rated working pressure of hydraulic system
|
Rated working pressure for hydraulic system
|
2.5Mpa
|
|
|
The Flow
of cooling system
|
100、200、300、400L/min
|
